ATLAS Copco says that its attachments reduce scheduled time for bridge demolition by 25%
The A3 is one of the most frequented motorways in Germany and suffers from growing traffic volume. As part of the extension to six lanes, the 540 m long bridge crossing the river Main near Randersacker was blown up. The demolition material was removed in record time.

After the 45 years old bridge was blasted, the B13 underneath the bridge was to be re-opened to traffic within 48 hours. 2,300 m3 of reinforced concrete which collapsed on this section of the B13 had to be crushed and removed. Across the entire length there are 25.000 m3 of reinforced concrete to be removed.

Company Ruppert from Frickenhausen used their fleet of Atlas Copco attachments which consited of eight Atlas Copco medium to heavy hydraulic breakers with service weights of 1200-7000 kg demolished the material. Another six hydraulic pulverisers were crushing the fragments on the spot. On the other side of the Main a railway track intersects with the old bridge, where blasting is prohibited. Two CombiCutters CC 2500 U and CC 3300 U have been purchased for the use on longfront excavators in this section.

The B 13 was already cleared after only 36 hours, so that the road could be opened to traffic 25% ahead of schedule.


http://www.drillblast.com.au/showcase/atlas-copco-drilling-attachments/


For more information visit Drilling Machines category