Spacepac Industries Provides Work Platforms Designed For Forklift Transport
http://www.heavymachineryinfo.com/articles/1782/1/Spacepac-Industries-Provides-Work-Platforms-Designed-For-Forklift-Transport/Spacepac-Industries-Provides-Work-Platforms-Designed-For-Forklift-Transport.html
By Article Admin
Published on 02/4/2008
Work Platforms Designed For Forklift Transport
Spacepac Industries , being an established industrial supplier in Wollongong is bringing in the new Work platform for lifting up to 250kg load. Hence it is able to handle much heavier loads as compared to cranes.
Type: WP-N Work Platform
The type WP-N Work Platform has been designed for forklift transport to safely carry out tasks of short duration and occasional usage such as maintenance, repair, cleaning or stock taking.
Manufactured strictly in accordance with Australian Standard AS 2359.1, the Type WP Work Platform is suitable for a maximum of two people.
Specifications:
The specifications of the work platform includes the following:
*
Safe Working Load (SWL) 250kg
*
Load Centre 600mm
*
Unit Weight 110kg
*
Pocket Size 160 x 60mm
*
Pocket Centres 640mm
*
Horizontal Centre of Gravity 550mm
*
Vertical Centre of Gravity 600mm
*
Supplied with 2 Harness Anchor Rings
*
Supplied with Slipper Locking Pins
*
Painted Finish in Safety Yellow
Unit is supplied standard as a Flatpack (1230 x 1150 x 200mm), or may be fully assembled upon request. Spacepac Industries advised that the use of a Work Platform on a Forklift truck should not be considered if the capacity of that Forklift is less than 1800kg for a Counterbalanced type or 1080kg for a Straddle type Forklift.
Spacepac Industries , being an established industrial supplier in Wollongong is bringing in the new Work platform for lifting up to 250kg load. Hence it is able to handle much heavier loads as compared to cranes.
Spacepac Industries Provides Work Platforms Designed For Forklift Transport
Work Platforms Designed For Forklift Transport
Type: WP-N Work Platform
The type WP-N Work Platform has been designed for forklift transport to safely carry out tasks of short duration and occasional usage such as maintenance, repair, cleaning or stock taking.
Manufactured strictly in accordance with Australian Standard AS 2359.1, the Type WP Work Platform is suitable for a maximum of two people.
Specifications:
The specifications of the work platform includes the following:
*
Safe Working Load (SWL) 250kg
*
Load Centre 600mm
*
Unit Weight 110kg
*
Pocket Size 160 x 60mm
*
Pocket Centres 640mm
*
Horizontal Centre of Gravity 550mm
*
Vertical Centre of Gravity 600mm
*
Supplied with 2 Harness Anchor Rings
*
Supplied with Slipper Locking Pins
*
Painted Finish in Safety Yellow
Unit is supplied standard as a Flatpack (1230 x 1150 x 200mm), or may be fully assembled upon request. Spacepac Industries advised that the use of a Work Platform on a Forklift truck should not be considered if the capacity of that Forklift is less than 1800kg for a Counterbalanced type or 1080kg for a Straddle type Forklift.